This is a quick post to introduce one of my current projects. This one is a Victorian slant top secretaire that I have recently started. It has some beautiful oak veneer as well as solid pieces that need some love. There will be quite a bit of small repairs to the finish, so some color matching. But the part that I’m excited about is the glass for the doors, as I have not had to replace this kind of glass before. So I’ve been busy researching this and finding out what my options are (find original glass or have it made). Anyway, it’s going to be a fun project, and I’ll be posting about my progress soon.
Category Archives: SlantTopSecretaire
Slant top secretaire restoration. Part 2
This is continued from my first post.
I’ve reached the point where I have taken the piece apart and cleaned each part individually, looking for weak or loose joints, damage to solid wood or veneer and other issues. I’m now ready to start fixing the individual items.
On a side note: I’ve been looking for some maker’s mark or indication of where this piece came from, and have not found anything to narrow it down. I’m pretty sure it’s late 1800s, but it could be very early 1900s (up to 1910).
Back to the topic at hand. One of the things I noticed when disassembling the piece is that the back did not appear to be original. The rebate in the back is 3/4 inch, but the sheets that were used for it were only 1/4 inch. The pieces that made up the back were not plywood, but what appears to be poplar (or something similar).
The back had split in a couple of places and I didn’t want to muck about with it, so I took it out and will be replacing it with a frame and panel (actually two). This will stiffen the carcass much better and keep the piece from racking. I have a feeling that racking caused the splits in the back since the thin sheets didn’t stiffen the frame nearly enough.
I have gone over the drawers and doors, cleaned them up, removed marks, and then colored and shellacked them.
The doors just needed some cleaning. In the picture above you can see the bottom left corner has separated. I reglued this corner, and they are now ready for the new glass I had made for them by a local glazier. I don’t have any pictures of them with glass yet, but I will post some soon.
The next post will focus on the physical repairs I’ve made to the hinges of the desk. This is the most involved part of the restoration and so it’s the part I’m really taking my time on.
Slant top secretaire restoration, Part 3
I mentioned in my previous post that the hinges for the slant top portion of the desk would be the most involved part of the restoration. The hinges had been replaced a few times and the hinge shape had changed as well. This not only left random holes but large shapes carved into the shelf and the lid.
It looks like these replacement hinges were a bit of a rush job. The mortise that the hinges are set in is too large for the hinge and the person doing the restoration may have used one chisel to remove the material. It also looks like the hinge may have been installed incorrectly, which then caused a portion of the lid to break off when the lid was opened. This is all speculation, but I like to put myself in their shoes and see if I can find explanations for the things I find.
As you can see there are a couple of different sizes carved into this piece and that along with the damage done to the edge of the lid told me that I need to repair these and not just put new hinges in there.
This is where the project gets challenging because I have to remove material and then splice in new material to make the piece stronger. In this case, I need to remove a section where the lid broke and also remove the material around the old hinge mortise. I then splice in the new material. When I cut these pieces I have to pay attention to grain direction, grain orientation, grain consistency (is it clear straight grain or curvy). In the case of the broken lid portion, I saw that the edge showed the flat sawn side and the flat top showed the quarter sawn. For the hinge pieces, I looked at how the quarter sawn grain ran and oriented the new pieces to mimic that.
In the picture above, you can see that I cut the mortise along the grain and oriented the patch so that the grain followed the surrounding grain. Once the piece was glued I then used a block plane and then sandpaper to bring the material down to level.
In my next post I’ll show the rest of the process of cutting in the new hinges and coloring and blending the repairs.
Slant top secretaire restoration, Part 4
This is continued from part 3. I’ve made good progress on the secretaire, and I was going to say that it doesn’t look like it, but after going through my previous posts, I take that back.
I’ve made progress on several fronts (and backs). The back frame and panel is finished. I used some 3/4 inch pine for the frame and 1/4 inch plywood for the panel. I cut the pine into 2 1/2 inch rails and stiles and then got out one of my plough planes with a 1/4 iron.
A couple of fun facts about the planes to the right in the picture above. The one with the wormholes I got while on a project (my day job) in Georgia. A co-worker and I were driving to the project site when we saw an antique store and had to stop. I found this toothing plane and even though it’s pretty holy, the blade is in great shape. I’ve used it once (I do not collect tools, I use them. That’s my story and I’m sticking to it.) but I don’t work with thick veneers – yet – so I haven’t had a chance to really put it to use. Next to it are a pair of match planes from Sweden, made in the 1880s. I had been drooling over them at Allen Snyder’s booth at Midtown Antiques in Stillwater for a while, but then forgot about them when they weren’t there any more. Holly had got them for my birthday present.
Back on topic. The frame and panel for the back was pretty straightforward, so I was able to knock it out in a day. The coloring took another couple of days.
I made the back-facing side darker, to match the back that was on here. The front-facing side, I matched to the color and tone of the case.
I also finished the hinges for the slant front and the damaged portion of the lid.
The next thing I’ve started on is the front doors. You can see the beautiful bevelled glass that I got from my local glazier, Tom Huisman https://www.huismanglass.com/
I’ll have more pictures of the glass in the doors in a later post. Right now I’m making repairs and replacing the hinges. There had been several repairs of the doors which ended up with a large mortise cut into both doors.
Because of the deep mortises that had been cut into both doors there was nearly an inch gap between the doors when they closed, so the lock could not reach the other door.
I cleaned out the mortises and spliced in some oak.
I then shaved it down with a block plane, spokeshave, and sandpaper.
Next steps will be to fit the new hinges and color the repairs.
I’m really getting close to finishing this piece, and I’m very excited. Once the front doors are done, I’ll finish my touch-ups of the slant top, as it has become something of a distraction. I’ll have better pictures of the hardware in my next post and talk about where I got it.
Slant top secretaire restoration, Part 5
So, even with all the physical repairs that I’ve done on this piece, the portion of the restoration that has taken the most time and required the most precision is the hardware. I have replaced the slant top hinges, the slant top lock, the large drawer locks, the front door hinges, and the front door lock. The front door hinges took the longest of anything because they require the most accuracy, with the slant top hinges a close 2nd.
When I started this project, I wasn’t even sure that I’d be able to find the hardware I was looking for. I began my search on eBay and found some great hardware (for future projects), but nothing that I could use on this project. I then went to Van Dykes Restorers and found some very good possibilities for the hinges, but eventually moved on to Hardware of the Past (before they closed shop) for the escutcheons and the lock for the slant top.
The hinges for the slant top were worrisome on many levels for me because not only was I repairing damage from previous repairs, but I then needed to fit and mount new hinges.
I had thought about leaving the mortises for the hinges and just trying to find a hinge the same size, but that was a no-go. There had been quite a few repairs and I wanted to make sure that my repairs were on solid ground, so I mortised out a lot of the previous repairs and then laminated in patches for the hinges as well as the damage to the edge of the lid.
I wrestled with the idea of laminating a strip all the way across the lid, but that would have been an unnecessary removal of a lot of original material.
I then moved on to the locks for the large drawers. After the comedy that was me trying to remove the original lock from the lid, the drawers were very straightforward.
The front doors were the most fiddly of the hardware because I didn’t use the hinges that were there (they weren’t the originals), the doors hadn’t been hung correctly, and I had to repair some significant damage to one of the doors where a hinge had been torn off.
I mortised the hinges into the doors and into the sides and the doors now close with a wonderfully small and uniform gap all around and the astragal covers the gap between the doors beautifully. I don’t have a picture of that yet, but it’s coming.
After all of that fiddly stuff, the podiatrist is finally in and will fix my lady’s broken toe.
Tune in next time. Same Bat Time. Same Bat Channel.
Slant top secretaire restoration, Part 5 1/2
Just wanted to post a quick update on her foot surgery. The procedure was a success and she is already standing and using her new toe.
All the major repairs and restoration are now complete and I’m now working on the sides and some of the egg and dart moulding. Very close to being done.
Slant top secretaire restoration, Part 6 – final
Last post on this project as it is finished and ready to go back to its owners. Lots of before and after pictures, but you can find the entire process here.
Replaced all of the hardware (locks, hinges, pulls, escutcheon).